Should You Buy a Fabric Steamer?

For those who hate ironing, a fabric steamer seems like a good substitute. This is because people tend to think that it is much easier to use than an iron and the chore would also be completed much faster.

However, before you rush out to get one to replace your iron, bear in mind that not all steamers are able to do what an iron does. A fabric steamer can make your clothes look presentable, but if you are the type that likes a crisp-looking shirt with creases at the right places, most of them cannot give you that kind of result. An iron still does that best because of the pressure that is applied.

Comparatively, a fabric steamer only allows you to Move the nozzle vertically to get rid of wrinkles. You cannot apply pressure on a hanging garment compared to one being laid out on an ironing board. Hence, it follows that an iron would give you good results if you are seeing for crispness and starch-like qualities in a shirt.

A necessary inequity may be noticeable in the middle of using an iron and fabric steamer in cotton materials. The latter may work fairly well with wool and silk garments, but when it comes to cotton apparel, this is where the pressure of an iron is required to erase all the wrinkles.

Furthermore, although using a clothes steamer may seem faster, it is not necessarily so. To use it, you need to bring it to the tub to fill it with water and then, wait for it to heat up. Depending on which model you are using, you will need to wait at least a merge of minutes for it to boil and generate steam to begin your chore. Therefore, some people genuinely find the time-saving is not as much as they would expect, besides the problem needed to fill the steamer.

Basically, a fabric steamer works best on delicate items and drapes. It cannot genuinely replace an iron although it can give you presentable clothes. Many people buy it mental they can give up ironing thoroughly only to be mistaken. This is because both the fabric steamer and iron have their strong and weak points. They compliment each other rather than being able to replace one with the other.

Thus, if you have a lot of cotton garments and materials with stubborn wrinkles in your wardrobe, then an iron should still be the appliance to get. On the other hand, if you are not too fussy on getting out every tiny wrinkle on your clothes, then you may be able to live with a fabric steamer. In short, either you should get an iron or a fabric steamer would depend the type of garments you have and the results that you want.

---

See Also : Rechargeable Batteries | Green Battery Chargers | Ant Farm

How to Cook Patty Pan Squash

"Awww, how cute," is the reaction of some citizen upon being introduced to patty pan squash. Also called scalloped squash, they are part of the summer squash family but the smallest of the lot, measuring as little as an inch across.

Patty pans are a Light green when young but shade toward white when mature. Their shape has been compared to that of a flying saucer. You can find them in the market and farmer markets from summer into early autumn. pick the smallest ones ready if you want the best taste and texture. If you deal with them carefully, you can store them in the fridge for up to 6 days.

Patty pan squash is a great source of vitamins C and A, as well as folic acid. A cupful of this squash has less than 30 calories.

You needn't make a fuss over cooking patty pan squash. Just keep it simple. To cook patty pans whole, wash them well, place in a steamer basket over some boiling water, and steam 4 to 6 minutes or until tender (test with a fork).

As an alternative to steaming, you can try roasting patty pan squash in your oven. It's roughly just as easy. Get a pound's worth of patty pan, trim off the skin, and cut each squash into halves or quarters. Toss with a concentrate of teaspoons of olive oil and a little salt. Place the patty pan pieces on a baking sheet and roast on the top rack of a pre-heated oven (420 degrees) until they are tender enough to pierce with a fork, which will be about 10 to 15 minutes.

Patty pan squash is also exquisite when sauteed. Slice three or four medium-sized squash along their diameter, drop into a pan on top of the stove, add a tablespoon of butter, and sautee until the slices have browned on one side. Turn and continue sauteeing until the second side has browned. If you like, you can toss the sauteed patty pans over cooked pasta.

---

Visit : Rechargeable Batteries | Green Battery Chargers | Cimarron Comfort Toilets Fun Rugs Olive Kids Style Dinosaurland Rug

How to take off Rust From a Rusted Iron Wall Plaque

There is no doubt that iron is a very versatile material due to its vigor and malleability. It has found many uses in construction such as cables, I-beams, and re-bars.

Aside from being a sturdy construction material, iron can be used as a decorative medium. It can, for example, be used to generate wrought iron tables and chairs that adorn lawns. It can be made into iron grilles serves as a garnish and a protection portion for windows. For Victorian themed homes and establishments, iron can be used to make decorative dividers.

But even if iron is a durable material, it cannot stand the onslaught of rusting. Eventually, iron will rust but the pace depends on the kind of iron.

What exactly causes rust? Rust in an oxide, a ordinarily reddish substance that is produced when iron chemically reacts with air moisture or water. Rusting is a form of corrosion. Eventually, all the iron in a structure will turn into rust and disintegrate. Irons such as steel rust quickly; just a few days in the open and rust splotches will show. On the other hand, aluminum and stainless steel rust very slowly. This is due to the properties of its oxide, which for real forms a protective passive coating.

Since rust destroys the customary beauty of a decorative item such as an iron wall plaque, it is foremost to get rid of rust Yes, getting the rust out is tough but easy. Here is a easy method of taking the rust off a decorative piece.

1. You would need a few rust-removing materials-a soft bristled paintbrush, a market rust cleaner that has oxalic acid, a small whole of water, a wire brush, an old toothbrush, and a sponge. Rust cleaner is a strong chemical thus you should wear rubber gloves and eye protection.

2. First clean the rusted piece with a paintbrush to reMove exterior rust and dust.

3. Mix a solution of water and market rust cleaner. The aggregate depends on the severity of the rust if the rust is particularly severe, you will need more rust cleaner in the solution than water.

4. Dip the wire brush in the solution and start scrubbing the rust off the piece. Scrub the piece in a circular motion. It for real doesn't matter where you should start, but be sure to cover the whole piece. A missed splotch ordinarily spreads eventually.

5. Continue scrubbing until all the rust is reMoved and the bare metal shows on the piece. You can brush off the residue off the iron wall plaque using an old toothbrush.

6. When all the rust is reMoved, wipe the piece with a parasite dampened with water. You may also wipe the piece with a dampened parasite while scrubbing. Then dry it using a soft cloth.

7. To preclude supplementary rusting, apply a coat of rust unyielding primer on the piece. Then top it off with a two coats of rust unyielding paint. You can get these from do-it-yourself shops.

travel steam iron

---

Recommend : Rechargeable Batteries | Green Battery Chargers | Replacement Parts for Beef Eater Grills Zukes Mini Naturals Dog Treats